About This Design…
If you have a 3d printer, i have designed some TinyWhoop racing flags / gates feet that have an M6 thread in the base so they can have magnets or suction cups attached and be mounted on walls, windows, ceilings and wherever else your imagination decides!
Download TinyWhoop Race Gate Feet…
TinyWhoop Race Gate Feet Build Guide…
- Download the design you want from above or from thingiverse…
- Load the STL into your slicer and print however many you need.
- OPTIONAL… Screw in your magnets or suction cups
- Attach your air gates or flags
- Go make your track!
3D Printing Tips..
- The binder clip version may need to be printed in TPU and needs supports from print bed turned on
8 Pings & Trackbacks
Pingback:WhaleFPV TinyWhoop Race Flags - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates (Orange) - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates (Blue) - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates (Green) - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates (Pink) - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates (Yellow) - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Flags No2 - WhaleFPV.uk
Pingback:WhaleFPV TinyWhoop Race Gates Textures Vol.1 - WhaleFPV.uk